• Cliquer ici pour plus d’information
• Brochure

For optimum durability, reliability and value, the Combi 2-EZ® case erector is your clear choice for case erecting and bottom sealing. This proven bottom sealing machine is built with the industry’s strongest frame (lifetime warranty) for the most demanding 3 shift environments. The versatile Combi 2-EZ® case erector can form and seal the widest variety of cases, from single wall to triple wall corrugated. Add the Combi 2-EZ® case former to your line for instant productivity.

Features

• Heavy duty construction
• Welded one piece tubular steel frame
• Painted with « Steel-It » stainless steel pigment polyurethane
• Engineered for 3-shift production environments
• 2 minute changeover No-Tool adjustments using cranks and scales
• All adjustments are based on the width and height dimensions of the case
• No tune in time — first case is a good case
• Patented slideout 3M Accuglide™ tapehead (2-EZ®)
• Tapehead slides out of machine for easy tape roll changes & maintenance
• EZ-load walk-in case magazine — load cases in the machine while it is running
• Allen Bradley PLC controlled

INTELLIGENT and SAFE design utilizes solid state sensors and photoeyes for dependable operation throughout the erecting process.

Spécifications

• Cliquer ici pour plus d’information
• Brochure

The Combi Packaging System side belt-drive case erector can form and bottom seal cases at speeds up to 20 cases per minute. Combi’s new product offerings are a response to our customers’ need for faster speeds. This case erecting machine is built with the same optimal durability, reliability and value the 2-EZ® family of case erectors has provided over the years. This box erector is engineered with the industry’s strongest frame (lifetime warranty) for the most demanding 3-shift environments, the 2-EZ® HS case erector can readily integrate into your existing line. Combi’s EZ-load walk-in case magazine and 3-minute « No Tool » changeover system are standard features. The 2-EZ® side belt drive units are designed for years of dependable service and can form and seal the widest variety of cases, from single wall to triple wall corrugated.

2-EZ® HS Case Erector Features

• Up to 20 cases per minute
• EZ Load walk-in 45″ power magazine
• Heavy-duty welded steel construction
• 3M HST high speed 2″ tapehead
• Positive four flap closing
• Dual belt drive case indexing
• Panelview 300 OIT providing production feedback
• Self-cleaning vacuum system
• Safety back up photo eye with 20′ cord
• Right hand or left hand execution

2-EZ & 2-EZ HS HM

Spécifications

• Cliquer ici pour plus d’information
• Brochure

Combi Packaging System’s side belt drive case erecting machine form and bottom seal cases at speeds up to 15 cases per minute. Combi’s new product offerings are a response to our customers’ need for faster speeds. This case sealing machine is built with the same optimal durability, reliability and value the 2-EZ® family of case erectors has provided over the years. Our case sealing machine is engineered with the industry’s strongest frame (lifetime warranty) for the most demanding 3-shift environments, the 2-EZ® SB and 2-EZ® SB Plus can readily integrate into your existing line. Combi’s EZ-load walk-in case magazine and 3-minute « No Tool » changeover system are standard features. The 2-EZ® side belt drive units are designed for years of dependable service and can form and seal the widest variety of cases, from single wall to triple wall corrugated.

• Up to 15 cases per minute
• EZ Load Walk-In Case Magazine
• Heavy-duty welded steel construction
• 3M Accuglide II™ 2″ tape head
• Pneumatic Carriage Assembly
• Dual Belt Drive Case Indexing
• Self-Cleaning vacuum system
• Safety Back Up Photo Eye with 20′ Cord
• Right Hand or Left Hand Execution

2-EZ®SB and 2-EZ®SB Plus Designed to perform:

The flat case blank stands vertically in the easy to load, walk-in magazine. The case blank is extracted from the magazine with vacuum cups and formed by a retracting squaring arm. The leading minor flap is folded using a pneumatic flap folding mechanism. The major flaps are folded up using a rotary actuator powered flap folding mechanism. The case is transferred into the dual belt drives where it is transported across the tape head and is bottom sealed with a 2″ wide strip of pressure sensitive tape.

Options:

• Heavy Duty Locking Casters
• Low Case Supply Alarm
• Low Tape/No Tape Alarm Kit
• 3″ and 6″ Wide Tape Heads
• Spare Parts Kit
• Over-sized Case Modification
• Stainless Steel Framework
• NEMA 4 Water Wash Down
• Power Magazine for 2-EZ® SB
• Electrical Service:
• 2-EZ®SB 110 volt / 1ph / 20A

Spécifications

• Cliquer ici pour plus d’information

The 2-EZ® XL series case sealing equipment is a no-compromise solution for erecting and sealing larger cases. This cost-effective system features heavy duty components, positive case opening and transfer, and belt drive case sealing for perfect cases every cycle. The 2-EZ® XL is the perfect box erector system for increasing productivity and throughput in your large case packing process.

2-EZ®XL Features

• EZ Load Walk-In Gravity Case Magazine
• Heavy duty 2″x3″ welded tubular steel framework
• 3M Accuglide™ 2″ tapehead
• Pneumatic carriage assembly
• Dual belt drive case indexing
• Safety back up photo eye with 20′ cord

2-EZ®XXL and 2-EZ® 3XL Features

• EZ Load Walk-In Powered Case Magazine
• Heavy duty 2″x3″ welded tubular steel framework
• 3M Accuglide™ 3″ tapehead
• Pneumatic carriage assembly
• Heavy duty dual belt drive case indexing
• Safety back up photo eye with 20′ cord

Electrical Requirements

• 120 volt / single phase power standard

Air Requirements

• 80 PSI clean air supply. Air consumption is case size dependent.

Spécifications

• Cliquer ici pour plus d’information
• Brochure

Instant Productivity

The Combi CE-10 is an automatic carton sealer system that erects and bottom seals corrugated cases at speeds from 500 to 720 cases per hour. Our value-priced case erecting equipment is ideal for applications that require more throughput than manual case erecting can provide. This versatile carton erector system creates instant labor savings and increased production for a wide range of medium-speed applications. With industry-leading standard features like powered magazine and low-case and low-tape alarms, and fast no-tool changeovers, the CE-10 carton erector is a simple, operator-friendly solution for your packaging line.

Standard Features

• High-capacity powered case magazine
• Small footprint design minimizes floor space
• Low case & low tape alarms with stack light assure continuous operation
• Safety interlocked guarding restricts access to moving parts
• 2 inch 3M Accuglide™ Tapehead
• 12 case per minute operation for medium speed packaging lines
• CE international certification

Benefits:

• Labor saving design
• Square, tightly sealed cases
• Easy operation
• Fast changeovers

Additional Features:

• Heavy duty welded steel construction
• Right or left hand machine execution
• Allen Bradley PLC control
• Labor-saving efficient design
• Low tape & low case alarm with stack light
• Heavy-duty vacuum pump
• Safety disconnect
• Three-year factory warranty*

Electrical Service:

• 110 volt / 1ph / 20Amp

Air Consumption:

• 80 PSI, 2 CFM @ 10 cases per minute

Case Discharge Elevation:

• 22″ to 30″

Spécifications

• Cliquer ici pour plus d’information

The Combi E-series case erectors are the foundation of Combi case packing systems and the key to our packaging equipment versatility. The E-series case erectors are all essentially the same machine, but in different size frames. This modular approach allows us to integrate any size case erector with any case loader, be it an Ergopack, Drop Packer, Horizontal Loader, or Servo Pick and Place packers, creating custom case erectors.

E Series Case Erectors Features:

• Right hand or Left Hand Execution
• Patented Pusher Bar Case Feed
• Quick Changeover Package with Numbered Scales and Crank Adjustments for easy reference
• Heavy Duty Welded Framework with Lifetime Guarantee
• Full Guarding with Safety Interlocks
• Easy to Load, Walk-In Magazine
• Self-Cleaning Vacuum System with Puff / Blow Sequence
• Replaceable Filter to Protect Vacuum Pump
• Soft Start Pneumatic System
• Allen Bradley PLC Controls

Spécifications

• Cliquer ici pour plus d’information
• Brochure

As a specialist in the case erector industry, Combi is constantly incorporating new technology into our impressive portfolio of equipment. The Combi HCE case former offers high speed case erecting up to 35 cpm while achieving efficiencies in power and air usage and reducing overall machine size. Capable of erecting and sealing cases with adhesive tape or hot melt glue, the Combi HCE bottom case sealer is built with heavy-duty mechanical components and rugged welded tubular steel construction.

Features

• Up to 35 cases per minute
• Powered case magazine holds up to 450 cases
• Dual belt drive case indexing
• Positive case opening with opposing vacuum
• Positive mechanical four flap closing
• Low maintenance AC drive motors
• Heavy duty welded tubular steel construction
• Safety interlocked guarding
• Allen Bradley components
• 1 year comprehensive machine warranty on non-wear parts

Electrical Service

• 230 volt / 3 phase / 15A

Air Consumption

• 1.5 cfm @ 80 psi

Case Discharge Elevation

• 21″ – 26″

Spécifications